Binachem Binafond
Binachem Binafond. Bituminous Foundation Coating (ASTM C 309 Type I & BS 3416, Type I & II).
BINACHEM BINAFOND is a cold applied, solvent based Bituminous coating. Can be used on all horizontal and vertical surfaces, in the exterior insulation of the foundations and basement walls. BINACHEM BINAFOND foundation coating forms a flexible, damp vapour protective proof membrane.
Uses
BINACHEM BINAFOND can be used wherever curing of concrete combined with effective waterproofing, weather proofing andcorrosion resistant required.
- Provides effective protective coating for the foundations of the general structures and also acts as weather resistance.
- Cold waterproofing masonry, or concrete poured over bare ground.
Packaging:
- 200 Litre Drum
Сoverage:
Approximate coverage
COVERAGE*/LITRE
SUBSTRATE
2-3 m2
Concrete
2-5 m2
Metal
*Coverage data are for general guidance. Actual consumption depend upon substrate, application techniques & wastages etc.
Application:
Properly stir the BINACHEM BINAFOND before its application. BINAFOND can be applied by brush, broom or spray equipment.It may be applied to slightly damp but not wet surfaces. Sets in approximately 2 hours depending on climate conditions. Do notproceed to next layer before the first layer sets completely. Wait 2-4 hours for each layer of applications.In order to increase the product’s carrying strength on surfaces exposed to temporary or permanent water pressure, alkali-resis-tant fiberglass reinforcement mesh must be placed on the whole surface, and the second layer application must be to completelycover the mesh.
© Indoors East Africa LTD.
Thank you!
Email Sent Successfully